MANUAL CONTROLLER PINOUT
       
The new manual controller  communicated to the inerlock box via a 15 pin  
D-sub connector. The pinout for that connector is the following:

1   - V+ ( input)  
2   -  V- (input)
3   - Th amplifier Voltage output +
4   - Th amplifier Voltage output -
5   - El amplifier Voltage output +
6   - El amplifier Voltage output -
7   - Az amplifier Voltage output +
8   - Az amplifier Voltage output -
9   - Stop interlock - (Normally closed)
10  - Stop interlock +
11   - Override interlock - ( Normally open )
12   - Override interlock - ( Normally open )

Note that the only difference with the  schematic shown on the right is that the  STOP and OVERRIDE interlock are not conencted to the manual controller cicruit anymore.

---

Updated by D. Barkats , Oct 25, 2004